AS 5035 90 Degree Rotary Solenoid DC 24 V For A...
The 90 Degree Rotary Solenoid
The Rotary Solenoids from Dr. Solenoid especially made for applications in mechanical engineering, medical and laboratory technology, or the field of mobile machinery & transportation. They have a proven record as activation solenoids for sorting gates, throttles, and locking systems. A shaft with ball bearings on both sides ensures precise positioning and maximum durability. Because it is insensitive to linear acceleration, such rotary solenoids are also used for railway engineering as well as devices in aircraft.
The 90 degree rotary solenoids are available in a variety of models. Basic designs are single-stroke rotary solenoids with return spring and reversing rotary solenoids with two coils. Custom designed versions for special applications are available on request. These include models with plug-in terminals, modified shaft, or application-specific mounting holes.
Standard version and customization
Preferred models are designed for 24 V DC operation and 25% or 50% ED. All models are available for pivotal movements between 25° and 45°. The model with shafts on both sides can be used as a right-handed or left-handed version with rotary angles between 45° or 90°. These solenoids are equipped with a return spring mounted at the right-hand shaft. Depending on the size of the solenoid, its rotary angle, and the duty cycle, it might be necessary to use a so-called „soft“ return spring.
Alternative shaft designs, as well as models with mounting flange or reverse rotary solenoids, are available on request. Possible modifications also include individual solenoid designs for special operating voltages or specific duty cycles, as well as individual connection technologies, such as custom-made cable strands or terminals. Generally, these solenoids are designed for DC operation at a nominal operating voltage of 24 V. Using an additional external rectifier, models designed for 205 V DC operation can be operated directly at the mains power supply.
AS 0432 Rotary Latching Solenoid DC 24V 90 deg...
What is a rotary latching solenoid ?
A rotary latching solenoid is an electromechanical device that combines rotation and latching functions. It is mainly used to convert electrical energy into mechanical rotational motion and can maintain a specific position without consuming electricity. Here are the details:
Rotary Latching Solenoid 's Structure : it Usually composed of coil, permanent magnet, armature, and base. The coil generates a magnetic field when energized. The permanent magnet forms a magnetic flux flow path between the opposite pole faces of the armature and the base. The armature is the rotating part, connected to the output shaft or mechanism.
Working principle: When the solenoid is energized, the coil generates a magnetic field that interacts with the magnetic field of the permanent magnet. This causes the armature to rotate to a specific position. Due to the locking function, once the armature reaches the target position, it can be held in place by the magnetic force of the permanent magnet even if the power is removed. To change the position of the armature, it is necessary to apply an appropriate electrical signal again to overcome the locking force and drive the armature to rotate to another position.
Technical Parameters
Power supply voltage: usually 12V, 24V DC, etc. Different models have different voltage requirements.
Rotation angle: Common rotation angles include 30°, 45°, 90°, etc. The specific angle depends on the design and application requirements of the project.
Duty cycle: Indicates the proportion of power-on time in a duty cycle to the total time, which can be 10%, 15%, 100%, etc.
Power consumption: The power consumed by the solenoid valve when it is energized, ranging from a few watts to tens of watts depending on the model.
Switching time: Generally within tens of milliseconds, this is the time required for the electromagnet to complete one rotation and latching action.
advantage
Energy saving: It consumes power only when switching positions, and does not require continuous power supply to maintain the position, which can save energy.
High reliability: The self-locking function ensures that the position remains stable and is not easily affected by external factors.
Compact structure: Relatively small in size, can be installed in a small space.
AS 0628 DC 24V 45 Degree Rotary Actuator For So...
Rotary Actuator Definition and basic principle
The rotating actuator is an electromagnetic device that converts electrical energy into mechanical energy to achieve rotational motion. It is mainly composed of a solemnized coil, an iron core, an armature and a rotating shaft. When the solenoid coil is energized, a magnetic field is generated, causing the armature to rotate around the rotating shaft under the action electromagnetic force. In sorting machine, the rotating actuator can drive the corresponding mechanical parts to perform sorting actions according to the signal sent by the control system.
AS 0650 Fruit Sorting Solenoid,Rotary solenoid ...
Part 1: What is a rotary solenoid actuator ?
The rotary solenoid actuator is similar to the motor, but the difference between is that the motor is can rotate 360 degree in one direction, while the rotating rotary solenoid actuator cannot rotate 360 degree but can rotate to a fixed angle. After the power is off, it is reset by its own spring, which is considered to complete an action. It can rotate within a fixed angle, so it is also called a rotating solenoid actuator or an angle solenoid. As for the rotation direction, it can be made into two types: clockwise and counterclockwise for the project need.
Part 2: The structure of rotary solenoid
The working principle of the rotating solenoid is based on the principle of electromagnetic attraction. It adopts an inclined surface structure. When the power is turned on, the inclined surface is used to make it rotate at an angle and output torque without axial displacement. When the solenoid coil is energized, the iron core and the armature are magnetized and become two magnets with opposite polarities, and electromagnetic attraction is generated between them. When the attraction is greater than the reaction force of the spring, the armature begins to move toward the iron core. When the current of solenoid coil is less than a certain value or the power supply is interrupted, the electromagnetic attraction is less than the reaction force of the spring, and the armature will return to the original position under the action of the reaction force.
Part 3: Working principle
When the solenoid coil is energized, the core and the armature are magnetized and become two magnets with opposite polarities, and electromagnetic attraction is generated between them. When the attraction is greater than the reaction force of the spring, the armature begins to move toward the core. When the current in the solenoid coil is less than a certain value or the power supply is interrupted, the electromagnetic attraction is less than the reaction force of the spring, and the armature will return to the original position. The rotating electromagnet is an electrical appliance that uses the electromagnetic attraction generated by the current-carrying core coil to manipulate the mechanical device to complete the expected action. It is an electromagnetic element that converts electrical energy into mechanical energy. There is no axial displacement when rotating after power is turned on, and the rotation angle can reach 90. It can also be customized to 15°, 30°, 45°, 60°, 75°, 90° or other degrees, etc., using CNC-processed spiral surfaces to make it smooth and unstuck without axial displacement when rotating. The working principle of the rotating electromagnet is based on the principle of electromagnetic attraction. It adopts an inclined surface structure.
AS 3919 Innovative Applications of Bistable Rot...
About the bistable rotary solenoid ?
The Bistable Rotary Solenoid is protected by a solid carbon steel housing. The insulation class is IP50; an increase to IP65 is possible using additional housing. The nominal voltage is 12, 18 or 24 Volt; the torque is 1 Ncm to 1 Nm. The end positions are fixed with holding torque of up to 1 Nm. Depending on the application, a rotation angle of up to 180° can be realized. Hall sensors can be used as an option to check whether the magnet has reached the start or end position.
Working Principle
The bistable rotary solenoids are extremely fast switching rotating magnets for the optimum performance of demanding sorting and actuating tasks. With a speed of less than 10 ms, letters, banknotes or parcels can be sorted extremely fast and in the correct position. The high rotational speed is achieved by reversing the polarity of the rotary solenoid. The safe end position is realized by a permanent magnet. The so called "Polarised Rotary Solenoids" (PDM) are used in automation and logistcs as a cost-saving alternative to pneumatics or motor solutions due to their energy efficiency.
AS 0616 DC Rotary Solenoid Actuator for Money C...
What is Bi-Stable Rotary Solenoid ?
Bi-stable Rotary solenoid features clockwise and counterclockwise rotation every time the rotation direction is changed between +(positive) and –(negative). After power off, the Bistable rotary solenoid stays back to its position by using the holding force of the permanent magnet. Unlike the other kind rotary solenoids that use a spring for the motion of one direction, bi-stable solenoid rotate in both directions powered by magnetic force and current pulse.
AS-0616 DC 24V Rotary Solenoid
Unit Size: 39*32*16 mm
Principle of Rotary Solenoid:
Rotary solenoids are devices that produce a uniform magnetic field when an electrical current is applied to the Solenoid. They consist of a coil of copper wire, wrapped around a metal core. The metal core is mounted in the center of a disc. This has grooves on its underside to match up with slots in the body of the solenoid, and ball bearings to enable easier movement. These transducers have a higher starting force (torque) than linear solenoids, and are more resistant to shock. Actuators that are mounted on the opposite ends of a shaft or plunger provide a ratcheting action and advance or reverse position.
Product Features:
Rotary Angle : adjustable from 0-20 ° degree.
Power Torque: ＞9.3N.cm
Spring Torque: ＞0.4 N.cm
Voltage: DC24V
Power wattage : 28 W
Current: 0.8 A
Resistance: 45 Ω
Lifespan Cycles: ≥1000,000 times
Working Cycle: 1s On, 1.5s Off
What are Rotary Solenoids used for?
Rotary solenoids were originally developed for use in defense in the past decade, but nowadays are often found in industrial machinery such as lasers and shutters, banking counting machine as they're more robust than other types of solenoids.
Typically, rotary solenoids are used where space is limited and when long life is required (e.g., laser shutters). Their energized rotation (direction) is characterized as either clockwise or counterclockwise when viewed from the armature flange end. Most products have a spring return to bring the armature back to the home position when power is removed.
AS 2551 DC Solenoid Tubular Type
What is DC Solenoid Tubular Type ?
DC solenoids tubular type can custom the DC voltages between 3-24V and force up from 5 to 50N. The push and pull force can be significantly increased with limited energized time and with connection to big and high voltage. The DC solenoids tubular type is set up with a return spring inside, and are available in various construction types such as open, tubular, self-holding latching bistable and holding magnet designs. All DC solenoids tubular are available in mechanical pull L or push S designs and can be customized per specification. Common customizations like voltage , copper coil,plunger housing are mechanical as well as cable connections and cabling.
Powerful and compact.
Smooth and flat surface.
Low consumption and reliable temperature rise
Ambient temperature within 130 degrees.
Electromagnet in working condition would produce a certain amount of heat, electricity more frequently the higher temperature, which is a normal phenomenon.
AS 2337 DC Tubular Solenoid Pull
How is the tubular solenoid work?
The tubular solenoid adopts the round tube structure design. The working principle is the same as the frame type solenoid, which makes straight linear motion. Because the housing t is made of round iron pipes, there is no need to open a mold for stamping. It only needs to be processed by CNC machine, and can be processed into different sizes and styles according to based requirement.
Due to the tubular structure design, the tubular force is maximized. It is an electromagnet with a saturated magnetic circuit. Most of the electromagnetism is converted into magnetic energy, and it has the characteristics of high power and long lifespan. The round tube electromagnet has a unique design, is more stable in performance, more reliable in operation, and easier for installation.
In addition, the round tubular housing shell provides good protection and anti-corrosion for the internal electromagnetic part, making it very suitable for use in conditions with small spaces and harsh environments.
Unit Features:
Housing Shell : Carbon steel housing enclosure with electroplated coating, high shining and smooth surface, RoHs and Reach compliance.
Plunger: φ12mm Carbon steel material
Voltage: DC6 V
Stroke: 4 mm ( adjustable )
Force: 120 Gf
Power: 14.8 W
Current: 0.62 A
Resistance: 14.4Ω
Lifespan cycles: ≥300,000 times
Working Cycle: 0.1s On, 1s Of.
Customized Solenoid tubular Solutions:
Send your application requirements to jack@dr.solenoid.com
Dimensions of the space available for the tubular solenoid.
Stroke length in mm.
Force or torque required.
Voltage available & current limit of supply
AS 0835 Rotary Solenoid DC24 For fruit sorting ...
Features of bistable Rotary solenoid DC 24V actuator
It features bidirectional rotating movement after being energized. You can choose the angle from 30-100 degrees for your need of your device. The common working voltage is 12-24V, and the external limit is adjustable. This as 0837 rotation solenoid actuator needs to be equipped with a forward and reverse pulse electromagnet drive, with a programmable board or a relay self-made H-bridge switch. The rotation and reset are driven by the forward and reverse pulse power supply. After power failure, the shaft core can be kept at the initial or end position of the torque.
This rotation solenoid actuator has no axial movement during operation, and its service life can be up to more than 10 million times. This rotation solenoid actuators are widely used in industrial automatic control sorting, automatic sorting of electronic components, shutter control of lasers and color expansion, high-speed flipping action of textile equipment, dynamic simulation of entertainment equipment, automatic detection of rail transit line。
AS-6024 24V DC Rotary Solenoid
Dimension: φ 60*42 mm
Principe of Rotary Solenoid
A rotary solenoid is a device that created a rotary motion in response when an electrical current on. It consists of a copper coil, a stator, and a rotor. The copper coil generates a magnetic field when an electrical current is powered on. This magnetic field interacts with the stator and the rotor, causing the rotor to rotate around its axis.
The advantage of rotary solenoids is their ability to provide fast and precise rotational motion. In applications, high speed and accuracy are required.
Unit Features
Rotary Angle: 65°
Powered Torque: ＞9.3N cm
Spring Torque: ＞0.56N cm
Voltage: DC24V
Power : 38.4W
Current: 1.6A
Resistance: 15 Ω
Lifespan Cycles: ≥1, 000,000 times
Working Cycle: 1s On, 1.5s Off
Applications
Solenoid Valve Actuation is often applied to control the opening and closing of valves in fluid control systems accordingly.
Medical Devices: rotary solenoids are used in various medical devices, such as syringe pumps and automated drug dispensers.
Automotive Applications: Rotary solenoids are wildly used in various automotive machine, including transmission control, throttle control, and fuel injection systems.